StopDamp+ Complete Kit
A complete system for rising-damp treatment and wall restoration — from interrupting moisture movement through to protecting and restoring the finished surface.
A complete system for rising-damp treatment and wall restoration — from interrupting moisture movement through to protecting and restoring the finished surface.
StopDamp+ Complete Kit brings together the essential products needed to treat rising damp and restore affected walls as part of one coordinated system. It is designed to take the treatment from addressing moisture movement within the wall through to protecting and restoring the finished surface.
The StopDamp+ Complete Kit combines:
The primary treatment for rising damp. It is injected into the masonry to create a water-repellent barrier that interrupts the upward movement of moisture.
View product →Provides secondary moisture protection at the lower wall and wall-floor junction, helping protect vulnerable areas below the injection line.
View product →An anti-salt additive for cement-based plastering, helping the new plaster resist salts and efflorescence following damp treatment.
View product →Alongside the treatment products, the kit includes the tools needed to apply them:
A manual applicator gun for dispensing StopDamp+ Injection Cream cartridges cleanly and with consistent pressure.
Sized for drilling the injection holes at the correct depth and spacing ahead of applying the Injection Cream.
Helps clear drilled holes of dust and debris before injecting, supporting better cream penetration.
Before starting, confirm that rising damp is the cause. Then the kit is used in seven stages:
Using the complete system provides a coordinated approach to treatment and restoration, rather than addressing only one part of the problem.
The StopDamp+ Complete Kit is suitable for:
Rising-damp repair does not end when moisture movement is interrupted. The affected wall may still contain moisture and salts that can affect the plaster and lower wall surface.
The StopDamp+ Complete Kit brings the key treatment and restoration stages together:
Stop the moisture → Protect the base → Resist the salts → Restore the wall
Important: Correct diagnosis and preparation are essential. The Complete Kit is intended for rising-damp treatment and associated wall restoration and should not be used as a solution for penetrating damp and condensation damp.
| Product | Primary Role |
|---|---|
| StopDamp+ Injection Cream | Creates a water-repellent barrier within the wall |
| StopDamp+ BaseShield | Provides secondary protection at the lower wall area |
| StopDamp+ Cement Mix | Helps protect new plaster against salts and efflorescence |
For detailed product information, application requirements, storage instructions, and further technical details, refer to the StopDamp+ Technical Information Sheet.
Treat the damp. Protect the wall. Restore the finish. The StopDamp+ Complete Kit provides a practical, coordinated approach to tackling rising damp and its associated symptoms.